We have a range of pre-printed, ready-to-press papers to meet everyone's needs or we can print a custom design.
 
Permanent and waterproof 
High quality print 
Apply to most hard surfaces
 
Instructions for applying UV DTF wraps:
Use a squeegee or scraper and firmly scrape the front of the UV DTF print to make sure the print has adhered to the transfer film
Clean your blank substrate (item to be applied onto) with isopropyl alcohol
Check to ensure the wrap fits your substrate and please ensure you position it properly as the wrap cannot be moved/ removed once applied.
Remove the white backing by curling it back against itself- go slow and do not rush.
Place the transfer film on your substrate in the correct position.
Rub over the entire transfer paper again and once you are confident that all the air bubbles have been removed, gently peel off the clear transfer film by curling it back against itself - go slow and do not rush.
Rub over the substrate to check the image has been fully applied and stuck down.
 
Care instructions:
Hand wash only, do not soak or put in the dishwasher
Let the UV DTF wrap cure for a minimum of 48 hours before using
 
Disclaimer
At Urban Rose, we understand that sometimes mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error. 
 
How to submit your files/ Images: 
 
Via Email: info@urbanrose.biz
 
Via Upload: Upload button at top of this page.
 
Via Gang Sheet Builder:  Click Here
 
Instructions on how to build a gang sheet: Click Here